TRONies AUDIT

Address TRON Main Network:TNQGABmdMM9cZMqsgeZXmxe4i6ZEyt5bgs

Conclusion:

In the TRONies Smart-Contract were found no vulnerabilities and no backdoors. The code was manually reviewed for all commonly known and more specific vulnerabilities.
So TRONies Smart-Contract is safe for use in the main network.

CRITICAL ISSUES (critical, high severity): 0
Bugs and vulnerabilities that enable theft of funds, lock access to funds without possibility to restore it, or lead to any other loss of funds to be transferred to any party; high priority unacceptable bugs for deployment at mainnet; critical warnings for owners, customers or investors.

ERRORS, BUGS AND WARNINGS (medium, low severity): 0
Bugs that can trigger a contract failure, with further recovery only possible through manual modification of the contract state or contract replacement altogether; Lack of necessary security precautions; other warnings for owners and users.

OPTIMIZATION POSSIBILITIES (very low severity): 1
Possibilities to decrease cost of transactions and data storage of Smart-Contracts.

NOTES AND RECOMMENDATIONS (very low severity): 2
Tips and tricks, all other issues and recommendations, as well as errors that do not affect the functionality of the Smart-Contract.

AUDIT RESULT:

Optimization possibilities

1. Recording statistical parameters in the blockchain (very low severity):

List of statistical parameters that also increase the cost of transactions and increase the amount of data stored in the blockchain:
uint256 public totalUsers;
uint256 public totalInvested;
uint256 public totalWithdrawn;
uint256 public totalDeposits;
uint256 level1;
uint256 level2;
uint256 level3;
uint256 withdrawRef;
Recommendation: use events and log this information instead of writing it to the blockchain.
Note: this comment doesn’t affect the main functionality of the smart-contract.

Notes

2. Cycles on parallel deposits (very low severity):

In the withdraw, getUserDividends, getUserAvailable, getUserTotalDeposits, and getUserTotalWithdrawn functions, cycles unrestrictedly grow as the number of deposits increases. If you create a large number of parallel deposits from a single wallet, this can lead to an excessive increase in the transaction cost and incorrect display and processing of information.
Note: this comment is only relevant for a certain user, if he creates an excessive number of deposits (more than 300) from his wallet.

3. Closing the last payment (very low risk).

If the last user who leaves the project has a payout greater than the smart-contract balance, he will receive the entire available balance, but it will be recorded that the entire payout was closed.
Note: this comment is not critical, since after the smart contract balance is empty, it is unlikely that the contract will be used again. So it makes sense for last user to get at least something.

Independent description of the smart-contract functionality:

The TRONies contract provides the opportunity to invest any amount in TRX (from 100
TRX) in the contract and get a 250% return on investment, if the contract balance has enough funds for payment.
Dividends are payed from deposits of users (Ponzi scheme).
You can create a Deposit by calling the “invest” function and attaching the required amount of TRX to the transaction (from 100 TRX inclusive).
Each subsequent Deposit is kept separately in the contract, in order to maintain the payment amount for each Deposit.
The percentage charged to the user starts from 1,2% and depends on the following factors:

— For every 1,000,000 TRX on the smart contract balance +0.05% untill 14.3%.
— For every 1 day of non-withdrawal of dividends from the smart contract +0.15% untill 4.5% (when creating repeated deposits, the percent keeps growing).

For the first 2 days after withdrawal contract bonus is not used in calculation of dividends. After 2 days user gets contract bonus to his dividends.
Withdrawals of dividends are available at any time. Withdrawal by the use is performed by callin the “withdraw” function from the address the Deposit was made.
All dividends are calculated at the moment of request and available for withdrawal at any time.

Contract owners Commission: part of the invested funds is sent to two addresses:
(marketing address) — 8%.
(the project address) – 2%.
(the developer address) — 1%.

Three-level referral program: in the “invest” function, you can specify the address of the referrer. As a result, the referrer will get opportunity to withdraw % of the investor’s Deposit according to the following table:

Referrer level123
Percentage, %621

Requirements for the referrer: you can not specify your own wallet as a referrer, as well as a wallet that does not have at least one contribution in the smart contract. If wrong referrer is provided, the owner is set as referrer of the user.
The referrer is specified once at the time of any deposit and is assigned to the user without the possibility of changing. From each subsequent Deposit, the referrer will get his percents.

The contract contains 16 statistical functions that do not require sending transactions:

1. getContractBalance – smart contract balance (with decimals, for TRX – 6
characters).
2. getContractBalanceRate – the current percentage for a new user.
3. getUserPercentRate – the current percentage for the specified user.
4. getUserDividends – the current amount of dividends available to withdraw.
5. getUserCheckpoint – the date of the last withdrawal in UNIX Time.
6. getUserReferrer – the user’s referrer.
7. getUserReferralBonus – available referral bonuses for withdrawal.
8. getUserAvailableBalanceForWithdrawal — total available amount to
withdraw (dividends + referral bonuses).
9. isActive – whether the user has active deposits.
10. getUserDepositInfo – information about the user’s specified Deposit (the
sequential number of the Deposit starting from 0).
11. getUserAmountOfDeposits – the number of user deposits.
12. getUserTotalDeposits – the sum of each deposits of the user.
13. getUserTotalWithdrawn – user dividend withdrawal amount.
14. getUserDownlineCount — amounts of referrals of all levels.
15. getHoldBonus — hold bonus of the user.
16. getContractBonus — contract balance bonus.

Disclaimer

This audit is not a call to participate in the project and applies only to the Smart-Contract code at the specified address.
Do not forget that you are doing all financial actions at your own risk, especially if you deal with high-risk projects.
If you have any questions or are interested in developing/auditing of Smart-Contracts, please contact us and we will consult you.

Telegram: @gafagilm
E-mail: info@grox.solutions

Articles. Public audits

TronGuru AUDIT

Audit of the TronGuru Smart-Contract

Read more

Trony AUDIT

Audit of the Trony Smart-Contract

Read more

TRONies AUDIT

Security audit of the TRONies smart-contract

Read more

TronEx3 AUDIT

Security audit of the TronEx3 smart-contract

Read more

TronMatrix AUDIT

Security audit of the TronMatrix smart-contract

Read more

TRONPROM AUDIT

Security audit of the TRONPROM smart-contract

Read more

TRX-IN-BANK AUDIT

Security audit of the TRX-IN-BANK smart-contract

Read more

TRONex Audit

Security audit of the TRONex smart-contract

Read more

Tokens

Token is a certain unit of value in the blockchain...

Read more

ICO (CrowdSale)

ICO – Initial Coin Offering or initial coin placement, by...

Read more

ERC20 standard issues

Despite the widespread use, the standard of token ERC20 has...

Read more

ApproveAndCall function for ERC20

Due to one of the known problems of ERC20 EventHandling...

Read more

Example of Smart Contract operation

Since the idea of Smart Contracts was mostly spread in...

Read more

Application of Smart Contracts

Smart contract technologies are still new and it is possible...

Read more

Audit of «Neuromachine Eternal»

Public Audit of NRM Smart Contract

Read more
Load more
To close